Temporary Floor Protection — A Product Guide

Your floors need special protection when undergoing remodeling, throughout new development, moving heavy furniture or equipment, and for other occasions past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors so that you can make knowledgeable selections on the very best product to use for your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include frequent adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as 48 mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different rigid protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as 4 ft by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can often depart adhesive residue when removed. Widespread paper protection products embody:

· A coated compressed paper board 38 mils thick that’s breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive however doesn’t afford any impact protection and might simply tear

· Scrim paper could incorporate coatings or reinforcements to make them water resistant as well as scrim threads to bolster the paper and stop tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nonetheless they are additionally too thin to supply a lot impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of using Rosin paper is that it could cause a everlasting stain if the paper gets wet. Rosin paper may also rip simply so it not usually recommended for use

· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection nevertheless it shouldn’t be coated with a water-resistant finish and must be kept dry always in order that it does not disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so they shouldn’t be used on any floors which are curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not provide any impact protection and are usually rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled supplies making them a poor alternative in sustainable protection. Protection films are available in a wide range of adhesion «tack». Hard surface protection films can have a lower tack and color than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the standard size of four toes by eight toes and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on a wide range of floor types and provide adequate protection against heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they are bulky to carry and store. These wood sheets must be used on prime of a softer protection equivalent to a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t provide moisture protection and could be harder to chop to size than different protection types.

Добавить комментарий

Scroll Up
error: Content is protected !!
%d такие блоггеры, как: